Track Magic Bowling Ball

DRILLED FOR CONDITIONS WHEN OPEC PACKS UP AND LEAVES THE BUILDING. BARRELS OF OIL APPROACHING ABOUT $67, THIS BALL IS GOOD TO HAVE WHEN THE HOUSE FORGETS TO PURCHASE ANY MORE OR AFTER LOTS OF GAMES THROWN. THE FIRST 10 GAMES THROWING IT LEFT ME WITH A COUPLE OF 279'S AND GETTING USED TO IT, PLAYABLE STRAIGHT UP. OLDER BALL WILL PAY DIVENDENDS WITH SIDEPOT AND BRACKET ACTION COMING UP. SOMETIMES WHEN YOU SAY EVERYTHING YOU HAVE TO SAY IT MAY BE UNDER 100 WORDS, NEED I SAY MORE, I'M RUNNING OUT OF WORDS FOR THIS THREAD, LOOK FOR THIS BALL PURCHASE AND SHINE IT UP.

This ball should be in everyones bag who likes Track. It's a good ball for picking up the 10 pin. It's a good ball for picking up spares with sleepers and it's a great ball to use when the lanes dry out or when nothing eles seems to work. I have it drilled with the pin at 12 with the cg right below. I have 3/4 oz finger weight with 1/8 oz side weight. I sanded the ball to 2000 with 2000 polish on it. Its so good with spares I have put up my old Blue Dot that I've been using for the last 7 years. When the lanes get dry I pull it out and it gets the job done. It carries vary good for a low priced ball. I perfer to play outside with it but it gets the job done inside to. It had been siting in my pro-shop for about 8 month and I could not get rid of it. The ball has been around for a few years and is still being made so I thouth there must be a resin for it. Now I know why.<

The track magic is a good ball have a greats hook on the lane. He make some good job on the lane. I don't know why it's not very populart on my bowling center "Le Salon de Quille Univers à Place de la Cité"? But anyway, i'm lucky to recive this ball free from one of my friend because this ball have a great shot on the lane. The Coverstock of the track magic is particule, thats not bad to. Also this ball is must by good for the tournement. If your interresting about this ball, go ahead, buy this ball, your not going to regrete.

15# pap 4 3/8 x 1/8 down Reminds me a lot of a urethane ball. I drilled my Magic 3 1/4 pin to pap, cg swung 3", small flare increasing hole in thumb positive quadrant, pin next to ring finger. Amazing hit, and very cost effective, too! We got a few on closeout from our distributor. No real dislikes at all. Clears the heads very well, and starts up in the midlane. Strong even backend. I would say watch out for dryer lanes, as obviously the ball will hook more. Go buy a Track Magic (if you can get one ;-)

Layed out w/my favoite drilling, i used this as my only sanded ball for a while, rolled very early, but still had good legnth, then a hard snap and hook. Shot 704 first day i got it. It was hitting the thumb hole, so i decided to polish it to see if it would make a difference, now the ball didn't roll early, but later, then snaped even harder, but was still hitting the thumb. Hitting the thumb takes nothing away from the hit, as this ball hits as hard as anything thing else i throw. Pins go flying and i sometimes leave alot of 9pins. The pleasure has been yours. The great one