Reaction Characteristics The Cold Fury introduces a new version of the EnMotion coverstock called EnMotionKick. The EnMotionKick coverstock with its high gloss finish, combined with the Torsion Asymmetric core, creatre a ball which is clean through the front part of the lane, allowing the strength of the ball to be stored and "kick" off the friction. The result is a ball with potential for a strong back-end reaction and continuation through the pins. Response Time To understand the International Series Coverstocks better we will be using a 1-10 number scale system after the coverstock name to describe Response Time. Response time is how fast or slow the ball changes direction when it encounters friction. The higher the number the faster the ball will change direction similar to skid/snap. The lower the number the slower the ball will change direction similar to smooth arc. Utility Out of the box: With its Factory High Gloss Finish, the Cold Fury is an ideal ball for medium to medium-oily lane conditions. If your Cold Fury goes too long: Shiny surface finishes sometimes cause the ball to go too long before breaking. To get your Cold Fury rolling sooner, dull the surface with a 1000-grit abrasive (Abralon or Scotch-Brite Grey pad) to increase hooking action. To further increase hooking action, use a rougher abrasive to create an earlier reaction. If your Cold Fury hooks too early: Players with high rev rates and/or players with slower ball speed may, on a drier condition, see the ball hoor earler than they would like. To further increase the length, use a 2000-grit or higher abrasive and then reapply Brunswick's Factory Finish High Gloss Polish. Reaction Setup The Cold Fury can be drilled using the standard drilling techniques developed for two-piece balls, see the included drilling instructions for reaction characteristics and layout details.
| Line | Brunswick |
|---|
| Color | Blue/Purple |
|---|
| Coverstock | EnMotion Kick |
|---|
| Core | 2-piece Asymmetrical |
|---|
| RG | 2.548 |
|---|
| Differential | 0.036 |
|---|
| Intermediate Diff | 0.023 |
|---|
| Factory finish | High Gloss Polish |
|---|
| Weights | |
|---|
| Cleared USBC | Yes |
|---|
